Regency Panorama P36D - Manual (Page 65)

FPI P36D-1 Zero Clearance Direct Vent Gas Fireplace 65
1) Remove the 3 faceplate mounting phillips head screws from the
inside top of fi rebox, and discard if necessary.
2) Place top grill in brackets located inside top of fi rebox as shown.
3) Remove hinge brackets on bottom left and right side of fi rebox by
removing 2 screws and discard brackets only.
Bracket inside
top of fi rebox.
Hinge bracket.
Left side shown.
4) Install new hinge brackets using the same 2 screws removed
in step 3.
5) Install hinge to bracket then secure with screw.
New hinge bracket.
Left side shown.
6) Place something underneath bottom grill to prevent scratching.
7) Line up hinge holes in bottom grill holes.
8) Place screws half way in -- do not secure completely.
Hinge
9) Place bracket over screws then push to the side against faceplate
to lock in place as per diagram.
10) Tighten screws. (Screws will easily be tightened if using a stubby
screwdriver.)
Black Metallic Grills Only: Mount grill stopper to bottom of fi rebox
securing with one screw.
Bracket
Bracket
Top Grill
Bracket
Grill
Stopper
HAMPTON ® CAST GRILLS
11) Adjust ball plunger if necessary.
HAMPTON ® OPTIONS