Ricoh AFICIO 1035 - Manual (Page 180)

Troubleshooting
166
4
Document Server
Hole punch receptacle is full.
Open the door as shown and
empty receptacle. Punch hole receptacle is full. Check the punch waste box
and remove punch wase.
⇒
P.200 “ y Removing Punch
Waste”.
Cannot staple paper of this
size. The Staple function cannot be
used the paper size selected. Select the proper paper size
that can be used in Staple
mode.
⇒ P.47 “Staple”.
Duplex is not avilable with
this paper size. A paper size not available in
Duplex mode has been select-
ed. Select a paper size that can be
used in Duplex mode.
⇒ P.82
“Duplex”.
Maximum number of sets is *. The number of copies exceeds
the maximum copy quantity.
The following paper sizes are
available for Duplex mode:
A3
L, B4L, A4KL, B5KL,
A5 L. Select one of these sizes.
⇒ “Max. Copy Quantity” in
P.209 “General Features
2 /
4
”
Machine Status Problem/Cause Action
Scanned pages exceeded max.
number. Do you want to store
the scanned pages as a file? The number of scanned pages
exceeds the capacity per file of
the Document Server. If you want to store the
scanned originals as a file,
press the [Store File] key. The
originals are stored as a file in
the Document Server. If you
don't want any scanned origi-
nals to be stored, press the [Not
to Store]
key. The scanning
data will be cleared.
Machine Status Problem/Cause Action
AdonisC2_AEcopy110F_FM.book Page 166 Wednesday, October 3, 2001 1:43 PM