Ricoh AFICIO 1035 - Manual (Page 72)

Copying
58
2
Copying from the Bypass Tray
Use the bypass tray to copy onto OHP
transparencies, adhesive labels, trans-
lucent paper, postcards, and copy pa-
per that cannot be set in the paper tray.
Note
❒ The machine can automatically de-
tect the following sizes as standard
size copy paper:
❒ If you do not use the standard size
copy paper, you should input ver-
tical and horizontal dimensions.
The sizes that you can input are as
follows:
❒ When using paper larger than 433
mm in size, set it so that it is fed
straight into the machine.
❒ When using paper larger than 433
mm in size, the paper may become
wrinkled, and may not be fed into the
machine, or may cause paper jams.
❒ To make copies onto OHP trans-
parencies or thick paper exceeding
128g/m
2 , 35 lb., specify the paper
type in
⇒ P.60 “When Copying onto
OHP Transparencies or Thick Paper”.
❒ The maximum number of sheets
you can set at a time depends on
the paper type. For details about
paper capacity of the bypass tray,
⇒ P.21 “Copy Paper”.
A
Open the bypass tray.
B
Adjust the guides to copy paper
size.
Important
❒ If the guides are not flush with
the copy paper, a skew image or
paper misfeeds might occur.
C
Lightly insert the copy paper face
up until the beeper sounds.
The
k indicator on the display au-
tomatically goes on.
1. Extender
Metric
version A3 L, A4L, A5L,
8 1 /
2
" × 13"L
Inch
version A3 L, 11" × 17"L, 8 1 /
2
" × 14"L,
8 1 /
2
" × 11"L, 5 1 /
2
" × 8 1 /
2
" L
Metric
version • Vertical: 100 – 297mm
• Horizontal: 148 – 600mm
Inch
version • Vertical: 3.9" – 11.6"
• Horizontal: 5.8" – 23.4"
AdonisC2_AEcopy110F_FM.book Page 58 Wednesday, October 3, 2001 1:43 PM