Ricoh AFICIO 1035 - Manual (Page 45)

Setting Originals
31
2
90
° Turn
When you want to copy A3
K,
B4
K or 11" × 17"K size originals,
set your original in the landscape
orientation and then press the
key. The machine rotates the
original image and you can make
copies as you wish. This is useful
for copying large originals with
the Staple, Punch, Duplex, Com-
bine or Stamp functions.
For example, if you want to copy
A3
K or 11" × 17"K originals with
for the Staple function configured
as shown below:
Note
❒ It is recommended to use this
function together with the Auto
Paper Selector Preset Reduce/
Enlarge function.
A Press the
key.
C
Press the [OK] key.
Setting Special Originals
Use this function when you want to
use Batch, Mixed Sizes, or when you
select the original orientation.
Batch mode
Up to 80 standard originals can be set
in the document feeder at a time.
Important
❒ When setting special originals
such as translucent paper, set them
one by one.
Note
❒ The [Batch] key can be change to
the [SADF] key.
⇒ P.226 “Switch to
Batch (SADF)”.
❒ In Batch mode, even when one
original is set in the document
feeder, the original is automatical-
ly fed each time it is set.
A
Press the [Special Original] key.
B
Press the [Batch] key.
AdonisC2_AEcopy110F_FM.book Page 31 Wednesday, October 3, 2001 1:43 PM