Ricoh AFICIO 1035 - Manual (Page 52)

Copying
38
2
Selecting Copy Paper
There are two ways to select copy paper:
❖ ❖ ❖ ❖ Auto Paper Select
The machine selects a suitable size of copy paper automatically based on the
original size and the reproduction ratio.
⇒ P.40 “Rotated copy”.
❖ ❖ ❖ ❖ Manual Paper Select
Choose the tray containing the paper you wish to copy onto: Paper Tray, By-
pass Tray or large capacity tray (LCT).
Reference
⇒ P.58 “Copying from the Bypass Tray”.
Limitation
❒ Auto Paper Select mode is intended for normal and recycled paper.
❒ If you set all the paper trays other than “No Display” or “Recycled Paper”,
you cannot use Auto Paper Select.
Note
❒ See the following table for possible copy paper sizes and directions with Auto
Paper Select (when copying at a ratio of 100%):
❖ ❖ ❖ ❖ Metric version
❖ ❖ ❖ ❖ Inch version
❒ For some originals, the original size might not be detected correctly. ⇒ P.19
“Sizes difficult to detect”.
❒ When you set special paper, such as recycled paper, in the paper tray, you can
have the paper type shown on the display. ⇒ “Special Paper Indication” in
the System Settings manual.
Where Original Is Set Paper Size and Direction
Exposure glass A3 L, B4L, A4KL, B5KL
Document feeder A3 L, B4L, A4KL, B5KL, A5KL,
11" × 17"L, 8 1 /
2
" × 11"KL
Where Original Is Set Paper Size and Direction
Exposure glass 11" × 17"L, 8 1 /
2
" × 14"L, 8 1 /
2
" × 11"KL
Document feeder A4 KL, 11" × 17"L, 8 1 /
2
" × 14"L,
8 1 /
2
" × 11"KL, 5 1 /
2
" × 8 1 /
2
" KL
AdonisC2_AEcopy110F_FM.book Page 38 Wednesday, October 3, 2001 1:43 PM