Ricoh AFICIO 1035 - Manual (Page 184)

Troubleshooting
170
4
If You Cannot Make Copies As You Want
General
Problem Cause Action
Copies are not stapled. There are jammed staples in
the stapler. Remove jammed staples. ⇒
P.196 “ e Removing Jammed
Staples”.
Note
❒ After removing jammed
staples, staples might not
be ejected the first few
times you try to use the
stapler.
The number of copies exceeds
the capacity of the stapler. Check the stapler capacity. ⇒
P.47 “Staple”.
Copy paper is curled. Turn the copy paper over in
the tray.
Staples are wrongly posi-
tioned. Originals are not set correctly. Place the original on the upper
left corner of the exposure
glass.
⇒ P.47 “Staple”.
Misfeeds occur frequently. Copy paper size setting is not
correct. Set the proper paper size. ⇒
P.188 “Changing the Paper
Size”.
You cannot combine several
functions. Selected functions cannot be
used together.
⇒ P.143 “Combination Chart”.
When sorting, the pages are
divided into two blocks. The memory became full in
the middle of sorting and the
pages were ejected in two
blocks. You can interrupt the copying
when the memory becomes
full.
⇒ “Memory Full Auto
Scan Restart” in P.226 “Input/
Output”.
AdonisC2_AEcopy110F_FM.book Page 170 Wednesday, October 3, 2001 1:43 PM