Ricoh AFICIO 1035 - Manual (Page 91)

Directional Size Magnification (mm)
77
2
Directional Size Magnification (mm)
The suitable reproduction ratios will
be automatically selected when you
enter the horizontal and vertical
lengths of the original and copy im-
age you require.
1: Horizontal original size
2: Vertical original size
3: Horizontal copy size
4: Vertical copy size
Preparation
Specify the vertical and horizontal
sizes of the original and those of
the copy, as shown in the illustra-
tion.
Limitation
❒ If the calculated ratio is over the
maximum or under the minimum
ratio, it is corrected within the
range of the ratio automatically.
However, with some ratios, parts
of the image might not be copied
or blank margins will appear on
copies.
Note
❒ You can enter sizes within the fol-
lowing ranges:
❒ The following ratios can be select-
ed:
• Metric version: 25 – 400%
• Inch version: 25 – 400%
A
Press the [Reduce/Enlarge] key.
B
Press the [Specifid Ratio] key.
1
3
2 4
CP2M01EE
Metric
version 1 – 999mm (in 1mm steps)
Inch
version 0.1" – 99.9" (in 0.1" steps)
AdonisC2_AEcopy110F_FM.book Page 77 Wednesday, October 3, 2001 1:43 PM