Renesas Emulation Probe for M32C/88 Group M30880T-EPB - Manual (Page 49)

M30880T-EPB User’s Manual 3. Usage (How to Use the Emulator Debugger)
REJ10J0497-0100Z Rev.1.00 January 16, 2005 Page 49 of 100
3. Specifying the communication interface (LAN communication)
4. Specifying the communication interface (USB communication)
Specifying the communication interface
(LAN communication)
For selecting the LAN communication, click the radio
button “LAN” of the MCU tab. Specify the IP address of the
emulator at the IP address area. Specify the IP address by
one byte of decimal number separating each four bytes with
a period. Specify the port number at the Port area.
Specifying the communication interface
(USB communication)
For selecting the USB communication, click the radio
button “USB” of the MCU tab. The emulators connected by
USB cable are shown at Serial No. area. Select the serial
No. of the emulator you are going to connect.