Renesas Emulation Probe for M32C/88 Group M30880T-EPB - Manual (Page 64)

M30880T-EPB User’s Manual 3. Usage (How to Use the Emulator Debugger)
REJ10J0497-0100Z Rev.1.00 January 16, 2005 Page 64 of 100
3.4 Hardware Breakpoint Setting Window
(1) Breakpoint setup dialog box
1. Opening the hardware breakpoint setup dialog box
2. Hardware Break Point Setting Window in initial state
3. Opening the break event setting dialog box
H/W breakpoint Setting Window in initial
state
Select the “Enable H/W Break” check box, and this break
function will be enabled, allowing you to set hardware
breakpoints.
Hardware Break Point
Clicking this button opens the hardware breakpoint setup
dialog box.
Setting Break Event
Click the event line at which you want set a break event.