Roland FC-300 - Manual (Page 27)

27
Control Change Mode
1
Press [WRITE] in the top screen of the Control Change Mode.
2
Pressing PARAMETER [ ] [ ] to show the “Delete” screen.
3
Select the number (1–5) for the pedal settings you want to delete with VALUE
[ ] [ ].
4
Press [WRITE].
“Sure?” appears in the display.
5
If you want to delete the setting, press [WRITE]; if you want to cancel the
procedure, press [EXIT].
Deleting a Pedal Setting
The erased pedal setting
FC-300_e1.book 27 ページ ２００７年４月２４日 火曜日 午前１０時１０分