Roland FC-300 User Manual
Page 37
37
Patch Mode
When Setting System Exclusive Messages Using the
Template
When assigning the following System Exclusive messages, use the template.
1
Press PARAMETER [
] [
] to move the cursor to the MIDI message.
2
Press VALUE [
] [
] to select the “SYSEX.”
3
Press PARAMETER [
] to move the cursor to the “Template.”
4
Press [WRITE] to display the template selection screen.
5
Press VALUE [
] [
] to select the template.
6
Press [WRITE].
The contents of the template are input in the MIDI stream.
7
After making the changes, follow the instructions in “Storing (Saving)
Patches” (p. 44) to save the MIDI messages to a patch.
Template
GM SYS ON
MMC PLAY
MMC REC EXIT
GM SYS OFF
MMC DEF PLAY
MMC REC PAUSE
V-LINK ON
MMC FAST FWD
MMC PAUSE
V-LINK OFF
MMC REWIND
MMC RESET
MMC STOP
MMC REC STROBE
MMC LOCATE
Data
Message Number
MIDI Message
MIDI Channel
Template
FC-300_e1.book 37 ページ ２００７年４月２４日 火曜日 午前１０時１０分