Roland FC-300 User Manual
Page 36
36
Patch Mode
When Setting System Exclusive Messages
1
Press PARAMETER [
] [
] to move the cursor to the MIDI message.
2
Press VALUE [
] [
] to select the “SYSEX.”
3
Press [WRITE] to display the advanced editing screen.
4
Press PARAMETER [
] [
] to move the cursor to the data you want to
change.
5
Press VALUE [
] [
] to change the value.
6
If you want to add a data, use PARAMETER [
] [
] to move the cursor to
the position where you want to make the addition, then press [INS]. If you
want to delete a data, use PARAMETER [
] [
] to move the cursor to the
position where you want to delete, then press [DEL].
Repeat steps 4–6, edit the data.
7
When you have finished with the editing, press [EXIT].
8
After making the changes, follow the instructions in “Storing (Saving)
Patches” (p. 44) to save the MIDI messages to a patch.
Data
Message Number
MIDI Message
MIDI Channel
The maximum amount of data
that can be saved to a system
exclusive message is 256 bytes.
With Roland System Exclusive
messages, moving the cursor
to the message in front of F7
(the end of the transmitted
data) and pressing [WRITE]
performs a checksum and
inserts it there.
FC-300_e1.book 36 ページ ２００７年４月２４日 火曜日 午前１０時１０分