Ricoh Aficio 3260C - Manual (Page 116)

Connect Copy
102
4
How It Works
Note
❒ In this manual, the two machines connected are referred to as main machine
and sub-machine.
1. Main machine
2. Sub-machine
After the original is scanned, the data is stored on the hard disk of the main ma-
chine. As soon as the main machine starts copying, the data is transferred to the
hard disk of the sub-machine, and the sub-machine then starts copying.
The main machine is the one on which you press [
] to make Connect
Copy settings. The other machine becomes the sub-machine.
Machine Types and Options
• Both machines need not be of the same type.
• You can still use Connect Copy without an optional finisher or large capacity
tray (LCT). However, to use the Staple and Punch functions, the optional fin-
isher and punch unit must be installed on both machines. To use the Saddle
Stitch function, the optional Finisher MEC BK (saddle stitch) must be in-
stalled on both machines.
Interrupt Copy
• You can use the Interrupt function on the sub-machine, but not on the main
machine.
• You cannot use Connect Copy when a job has been paused using the Inter-
rupt function.
AFU032S
VenusC1_GB_Copy_F1_FM.book Page 102 Tuesday, January 17, 2006 3:43 PM