Ricoh Aficio 3260C - Manual (Page 124)

Connect Copy
110
4
Using Job Preset in Connect Copy
You can make settings for the next
Connect Copy job when the current
job is still in progress on the main ma-
chine. When the current job finishes,
the next job begins automatically.
Note
❒ You can preset a maximum of eight
jobs.
AAAA
On the main machine, confirm
that “
Press [New Job] to make
reservation. ” is displayed, and
then press [New Job].
BBBB
Confirm that “ Ready ” is dis-
played, and then press [ ] .
CCCC
Place the originals in the main
machine.
Reference
See p.9 “Placing Originals”.
DDDD
Confirm that “ Ready ” is dis-
played, and then make settings
for the job.
EEEE
Press the
{{{{Start}}}} key on the main
machine.
Scanning begins.
As soon as the current job is fin-
ished, the next job starts automati-
cally.
When placing originals in the ADF
A The main machine scans the
originals. Copying starts on the
sub-machine when the data
transfer is completed.
When placing originals on the
exposure glass
A After the first original is scanned,
place the next one and press
the
{{{{Start}}}} key. Press the {{{{#}}}}
key when you have finished
scanning all the originals.
B The main machine scans the
originals. Copying starts on the
sub-machine when the data
transfer is completed.
Note
❒ Preset jobs in Connect Copy
mode can only be changed
when
• the main machine has fin-
ished scanning the origi-
nals.
• copying has yet to begin
on either machine.
Reference
p.21 “Job Preset”
VenusC1_GB_Copy_F1_FM.book Page 110 Tuesday, January 17, 2006 3:43 PM