Ricoh Aficio 3260C - Manual (Page 41)

Copying from the Bypass Tray
27
2
When copying onto special paper
A Press the {{{{#}}}} key.
B Select paper type in "Special
paper".
C Press [OK].
DDDD
Place the originals, and then press
the
{{{{Start}}}} key.
Note
❒ When the Sort function is set,
press the {{{{#}}}} key after all origi-
nals have been scanned.
EEEE
When your copy job is finished,
press the
{{{{Clear Modes}}}} key to
clear the settings.
When Copying onto
Envelopes
Note
❒ When placing an original on the
exposure glass, place the original
with the bottom line aligned to the
left scale.
❒ When placing originals in the ADF,
place the originals with the bottom
line inserted in the ADF.
❒ When inserting envelopes, be sure
to unfold the flaps and position
them opposite to the paper feed di-
rection.
Reference
For more information about sup-
ported size of envelope, see "Rec-
o m m e n d e d P a p e r S i z e s a n d
Types", General Settings Guide.
AAAA
Open the bypass tray, and then
insert the envelopes with the side
you want to copy face up until the
beeper sounds.
BBBB
Align the paper guide to the enve-
lope side.
CCCC
Press the
{{{{#}}}} key.
DDDD
Press [Custom Size].
EEEE
Enter the vertical size of the enve-
lope using the number keys, and
then press [#].
FFFF
Enter the horizontal size of the
envelope using the number keys,
and then press [#].
Note
❒ When entering the horizontal
size for envelopes, including the
opened-out flap in the measure-
ment.
1. Vertical
2. Horizontal
GGGG
Select [Thick Paper 2] for the paper
type.
HHHH
Press [OK].
AFU131S
AFU147S
VenusC1_GB_Copy_F1_FM.book Page 27 Tuesday, January 17, 2006 3:43 PM