Ricoh Aficio 3260C - Manual (Page 56)

Copying
42
2
❒ If you have incorrectly en-
tered the ratio, readjust it us-
ing [
n n n n] or [o o o o].
D Press [Vertical].
E Adjust the ratio using [n
n n n] or
[ o o o o].
F Press [OK].
DDDD
Press [OK].
EEEE
Place the originals, and then press
the
{{{{Start}}}} key.
Directional Size Magnification
(mm)
A suitable reproduction ratio is auto-
matically selected when you enter the
horizontal and vertical lengths of the
original and copy image you require.
1. Horizontal original size
2. Vertical original size
3. Horizontal copy size
4. Vertical copy size
Preparation
Specify the vertical and horizontal
size of the original and that of the
copy, as shown.
Note
❒ You can enter sizes within the fol-
lowing ranges:
AAAA
Press [Reduce / Enlarge].
BBBB
Press [Specifd. Ratio].
CCCC
Press [Dir. Size Mag mm].
DDDD
Enter the horizontal size of the
original using the number keys,
and then press [#].
EEEE
Enter the horizontal size of the
copy using the number keys, and
then press [#].
FFFF
Enter the vertical size of the origi-
nal using the number keys, and
then press [#].
GGGG
Enter the vertical size of the copy
using the number keys, and then
press [#].
Note
❒ To change the length, press the
key you want to change, and
then enter the new value.
HHHH
Press [OK] twice.
IIII
Place the originals, and then press
the
{{{{Start}}}} key.
CP2M01EE
Metric
version Vertical: 1–999 mm
(increments of 1 mm)
Horizontal: 1–999 mm
(increments of 1 mm)
Inch
version 0.1"–99.9" (increments of 0.1")
VenusC1_GB_Copy_F1_FM.book Page 42 Tuesday, January 17, 2006 3:43 PM