Ricoh Aficio 3260C - Manual (Page 98)

Copying
84
2
FFFF
Press [All Pages] or [1st Page Only] to
select the print page.
GGGG
Press [OK].
HHHH
Place originals, and then press the
{{{{Start}}}} key.
Changing the stamp position
AAAA
Press [Change].
BBBB
Select the desired position, and
then press [OK].
Changing the stamp colour
AAAA
Press [Stamp Colour].
BBBB
Select the stamp colour, then press
[OK]
.
Front Covers / Back Covers
You can use this function to create
cover sheets by adding additional
pages of different paper, or copying
existing pages onto different paper.
Preparation
Before selecting this function, set
the tray for front cover sheets. See
"Front Cover Sheet Tray" or "Back
Cover Sheet Tray" in “Tray Paper
Settings”, General Settings Guide.
Note
❒ The cover sheet should be the same
size and orientation as the copy pa-
per.
❒ You cannot use the bypass tray
with this function.
❒ When selecting [Copy], select wheth-
er the front and back covers are
copied one-sided or two-sided. See
"Front Cover Sheet Tray" or "Back
Cover Sheet Tray" in “Tray Paper
Settings”, General Settings Guide.
Reference
To set paper using the interposer,
see “Loading Paper in the Inter-
poser”, General Settings Guide.
❖ ❖ ❖ ❖ Front cover
The first page of originals is copied
onto a specified cover sheet paper,
or a cover sheet is inserted before
the first copy page.
• Copy
• Blank
❖ ❖ ❖ ❖ Back Cover
The last page of originals is copied
onto a specified cover sheet paper,
or a cover sheet is inserted after the
last page.
• Copy
ADB001S
VenusC1_GB_Copy_F1_FM.book Page 84 Tuesday, January 17, 2006 3:43 PM