User stamp – Ricoh Aficio 3260C User Manual
Page 89
Copier Functions
75
2
BBBB
Press [Stamp].
CCCC
Press [Preset Stamp].
DDDD
Select the message.
EEEE
Press [All Pages] or [1st Page Only] to
select the print page.
Note
❒ You can change the stamp col-
our, position, size, and density
of the stamp. See p.75 “Chang-
ing the stamp colour” and p.75
“Changing the stamp position,
size, and density”.
FFFF
After you have specified all nec-
essary settings, press [OK].
GGGG
Press [OK] twice.
HHHH
Place the originals, and then press
the
{{{{Start}}}} key.
Changing the stamp colour
AAAA
Press [Stamp Colour].
BBBB
Select the stamp colour, then press
[OK]
.
Changing the stamp position, size, and
density
AAAA
Press [Change].
BBBB
Select the position for print, size,
and density, and then press [OK].
User Stamp
Prints a registered stamp onto copies.
Preparation
You have to register a user stamp
before using this function. See p.76
“Programming a user stamp”.
Stamp position and original orientation
Note
❒ You cannot use the bypass tray
with this function.
❒ Only one message can be stamped
at a time.
❒ The default stamp colour is black.
GCSTMP0E
GCSTMP6E
VenusC1_GB_Copy_F1_FM.book Page 75 Tuesday, January 17, 2006 3:43 PM