Ricoh Aficio 3260C - Manual (Page 146)

Troubleshooting
132
5
When Memory Is Full
Note
❒ If you set [Memory Full Auto Scan Restart] in User Tools (see p.154 “Memory Full
Auto Scan Restart” ) to [Yes], even if memory becomes full, the memory over-
flow message will not be displayed. The machine will make copies of scanned
originals first, then automatically scan and copy remaining originals. When
this happens, the resulting sorted pages will not be sequential.
❖ ❖ ❖ ❖ Connect Copy
Message Causes Solutions
Memory is full. *
originals have been
scanned.
Press [Print] to
copy scanned origi-
nals.Do not remove
remaining originals.
Note
❒ Copying will stop and this
message will be displayed
when the memory is full.
The scanned original exceeds
the number of pages that can
be stored in memory. Press [Print] to print out al-
ready scanned originals and
then delete scan data.
Or, press [Clear] to simply de-
lete scan data.
Press [Resume] to
scan and copy re-
maining originals.
[Stop] [Resume]
The machine checks if the re-
maining originals should be
copied, after the scanned orig-
inal is printed. To continue copying, remove
all copies, and then press
[Resume]
. To stop copying,
press [Stop].
Message Causes Solutions
Sub-machine memory
is full. Sub-machine
will be disconnect-
ed.
The data exceeds the capacity
of the sub-machine. Continue printing on the
main machine.
VenusC1_GB_Copy_F1_FM.book Page 132 Tuesday, January 17, 2006 3:43 PM