Ricoh Aficio 3260C - Manual (Page 157)

Settings You Can Change with User Tools
143
6
❒ [With Image Rotation] Use to copy
whe n usin g th e Au to Tray
Switching function.
1. Original
2. Paper (Tray 1)
3. Paper (Tray 2)
4. Paper (Tray 3)
❒ [Without Image Rotation] Only
copies with Auto Tray Switch-
ing if you load paper of the
same size and in the same orien-
tation in two or more trays. If
the paper is not the same size or
in the same orientation, copying
is interrupted and the message
“
Load paper. ” is displayed.
1. Original
2. Paper (Tray 1)
3. Paper (Tray 2)
4. Paper (Tray 3)
❒ [Off] When a paper tray runs out
of paper, copying is interrupted
and the message “
Load pa-
per. ” is displayed.
General Features P. 2 /
6
❖ ❖ ❖ ❖ Duplex Mode Priority
You can select the type of the Du-
plex function effective when the
power is turned on, or modes are
cleared.
Note
❒ Default: 1 Sided →1 Sided
❖ ❖ ❖ ❖ Copy Orientation in Duplex Mode
You can set the copy orientation
when making two-sided copies.
Note
❒ Default: Top to Top
❖ ❖ ❖ ❖ Original Orientation in Duplex Mode
You can set the original orientation
when making two-sided copies.
Note
❒ Default: Top to Top
❖ ❖ ❖ ❖ Change Initial Mode
You can select standard mode or
Program No.10 as the mode effec-
tive when power is turned on, or
modes are cleared.
Note
❒ Default: Standard
❖ ❖ ❖ ❖ Max. Copy Quantity
The maximum copy quantity can
be set between 1 and 999.
Note
❒ Default: 999 Sheets
❖ ❖ ❖ ❖ Tone: Original Remains
The beeper (key tone) sounds if
you forget to remove originals af-
ter copying.
ZGVX020E
ZGVX030E
VenusC1_GB_Copy_F1_FM.book Page 143 Tuesday, January 17, 2006 3:43 PM