Ricoh Aficio 3260C - Manual (Page 121)

Using Connect Copy
107
4
❒ When the number of originals
or copies is small, copying will
be done on only the main ma-
chine.
FFFF
Press the
{{{{Start}}}} key on the main
machine.
Copying starts on the main ma-
c h i n e a f t e r t h e o r i g i n a l s a r e
scanned.
Copying starts on the sub-machine
when data transfer from the main
machine is completed.
Placing originals on the exposure
glass
A Place the next original when
the machine has finished scan-
ning the first one. Press the
{{{{Start}}}} key.
B When all the pages have been
scanned, press the
{{{{#}}}} key.
Note
❒ If the machine is not in use, it
will begin copying.
Using Batch mode
A Place the originals and press
the
{{{{Start}}}} key.
B After the first set of originals
has been fed, place the next set.
Note
❒ The next set of originals must
be set while the Auto Feed
indicator is lit.
❒ To stop scanning or copying,
press the
{{{{Clear/Stop}}}} key on
the main machine, and then
follow the instructions on the
display.
Reference
p.15 “Batch”
C Collect your copies from both
the main and sub machines.
Note
❒ The number of copies might
differ on the main and sub
machines.
❒ Both machines may not fin-
ish copying at the same time.
❒ When using the Sort/Staple
function, copying is divided
between the two machines
by the number of sets. If a pa-
per misfeed occurs when
processing a set of copes, it is
not possible for the other ma-
chine to take over the re-
mainder of that particular
set.
- - - -Order of Copy Output
❖ ❖ ❖ ❖ When copying with the Sort/Staple
function
(Example) Copying 6 sets of a
three-page original
1. Main machine
2. Sub-machine
Copies are delivered face-down on
both the main and sub machines.
When using the Sort/Staple func-
tion, the processing of one copy set
cannot be divided between the two
machines.
AFU034S
VenusC1_GB_Copy_F1_FM.book Page 107 Tuesday, January 17, 2006 3:43 PM