Oki B4100 - Manual (Page 163)

40055101TH Rev.4 163 /
4.1.3.4 Separation Rubber, Roller Assembly Sensor
(1) Disassembly procedure
a) Separation rubber:
The separation rubber can be removed
from the Frame Assembly-Scanner (U).
b) Roller Assembly Sensor:
Remove the Plate-Support by removing
the two screws 1.
Note: Just fitting to two bossess.
c) Remove the two springs (L) and (R).
d) Remove the Roller Assembly-Sensor by
removing the Gear (Z31).
(2) Reassembly procedure
Reverse the disassembly procedure.
Frame Assembly-Scanner (U)
(CP4.1 Fig. 15)
(CP4.1 Fig. 16)
Gear (Z31)
Bearing S
Roller Assembly Sensor
Spring (L) Spring (R)
Earth Cable
Plate-Support