Oki B4100 - Manual (Page 27)

40055101TH Rev.4 27 /
The transmitter sends a call-back message to the receiver only
when the receiver does not respond to voice request of the transmit-
ter.
The fax can transmit a programmed alphanumeric message, such as
company’s name, consisting of up to 32 characters.
* (Outside only)
Received TSI can be printed at the top of the received page.
* TF + 05 (To enable or disable this function)
The fax can automatically print out a power-outage report when the
power off condition occurs.
The fax can print out an activity report manually, and provides a
record of your fax machine's last 30 communications. This report
does not contain the results of messages which were received
without errors. However it does contain messages received in
memory with or without errors.
* REPORT PRINTOUT+1(Manual printout)
The fax can print out a message confirmation report manually or
automatically in the following cases.
(1) When COPY key is pressed after a single location
call, this report can be printed.
(Manual printout)
* FP + 01 (To enable or disable automatic printing)
The fax can print out a broadcast entry report if specified during
operating sequence of a broadcast.
The fax can print out a broadcast confirmation report manually or
automatically.
* COPY key (Manual printout): Pressed after a broadcast.
* REPORT PRINTOUT + 2 (Manual printout)
* FP +02 (To enable or disable automatic printing)
Table 1.6.1 (1/2) Reports and Lists Specifications
No. Item Specifications
1 Call-back message
2 Sender ID
3 Transmitting subscriber
identification(TSI) printing
4 Cancel report
(Power outage report)
5 Activity report
6 Message confirmation report
7 Broadcast entry report
8 Broadcast confirmation report
1.6 Reports and Lists
Table 1.6.1 shows Reports and Lists Specifications.
Note: F +OT: Press FUNCTION and One-touch key
FP:
Function program setting
TF: Technical function setting
Rev.3