Oki B4100 User Manual
Page 90
40055101TH Rev.4
90 /
The display shows:
2:TECHNICAL FUNCTION
YES(
←
) NO(
→
/1-4)
←
Operations:
To bring the LCD up to the desired message
press SELECT FUNCTION key once, COPY
key twice and "2"key. (In case of no message
in memory)
Press key.
*1
←
Service bit setting is T.F. No. 01.
Enter "01"
Reference: See Figure 2.9.1 on the next page for the general operation flow.
FUNCTION NO. [ ]
ENTER 01-30
→
Setting (Toggle)
X: OFF ON
→
←
"01"
To 02: MONITOR CONT.
01:SERVICE BIT ?
[ X ] YES(
←
) NO(
→
)
*1: 01-29 for OKIOFFICE44, OKIFAX 4100/5200/5300
01-30 for OKIFAX 5500/5600
2.9.3 Technical Functions Example
Note: The fonts displayed on the LCD operation panel may differ from the fonts written this manual.
(1)
Service Bit Setting
1)
Purpose
To enable or disable the following functions:
•
Drum and toner counter display (clear)
•
Service default report printing
•
Protocol dump report printing
•
Ring response time setting
•
Dial parameters setting
•
Printer counters clearing
2)
Procedure