Oki B4100 User Manual
Page 233
40055101TH Rev.4
233 /
Table 6.15.1 (1/2) Service Code List
0000
Successful end of communication.
1080
STOP key has been pressed while calling a remote fax.
10A2
Busy tone detected.
14C0
Dial tone not detected.
14C1
Line current not detected.
14C2
Calling-and-waiting for line connection time out.
14C3
Dialling limit time out.
21A0
Received signal other than DIS/DTC.
21A1
Contents of received DIS/DTC are faulty.
21A3
Each time there is no response from the receiver for sending TCF three times.
21A4
TCF fall back is not possible.
21A5
Received signal other than the desired signal in response to sending TCF.
21B0
Transmitter tried to transmit by confidential transmission function but the remote fax has not the
capability of confidential reception.
21B1
Transmitter tried to transmit by Broadcast Initiate function but the remote fax has not the broadcast
capability.
21C0
In Closed Network setting, TSI/CIG/CSI is either not received or, if received, it is not authorized one.
21E0
Contents of CM/JM are faulty at transmission side.
21E1
Phase 2 time out at transmission side.
21E2
Phase 3 time out at transmission side.
21E3
Training time out of phase B control channel at transmission side.
29B6
In Confidential Reception, the mail box specified by transmitter is not set up and open.
29C1
In closed Network setting, TSI/CSI is either not received or, if received, it is not authorized one.
29E0
Contents of CM/JM are faulty at receive side.
29E1
Phase 2 time out at receive side.
29E2
Phase 3 time out at receive side.
29E3
Training time out of phase B control channel at receive side.
39A0
The number of continuous-error lines have exceeded the specified limit.
39A1
The number of random-error lines have exceeded the specified limit.
39B0
Memory Overflow has occurred while receiving in memory.
39B1
Memory Overflow occurred during Confidential Reception.
39C0
DECODER hardware error. (cannot reproduce picture)
Code
Description