Oce North America TDS600 - Manual (Page 122)

122 Océ TDS600 Multifunctional Digital System User Manual
How to use the remote system
Start up the Océ Remote Logic applications (Océ Settings editor, Océ Queue
manager, Océ System control panel), on a remote client after you installed the
software (see ‘Installation procedure for MS Windows systems’ on page 111).
In order to use the functionality you first have to add an Océ Power Logic
controller and then connect to an available Océ Remote Logic controller.
▼ ▼ ▼ ▼ Add an Océ Power Logic controller
1 Open the ‘File’ menu and select ‘Connect to’.
A dialogue box will appear with a drop-down list box containing the already
added Océ Remote Logic systems.
2 Click ‘Edit...’. The ‘Edit systems’ dialogue box appears.
3 Enter the IP address or the name of the Océ Remote Logic system you want to
connect to, in the ‘Systems’ text box.
4 Click ‘Add’. The system is added to the list. You can add as many systems.
Note: You can also remove an Océ Remote Logic system. Select one in the
list and click ‘Remove’.
5 Click OK twice to return to the application.
Note: Before you can add an Océ Remote Logic system, the system has to be
installed and configured by a system consultant or a technician.
▼ ▼ ▼ ▼ Connect to an Océ Power Logic controller
1 Open the ‘File’ menu and select ‘Connect to’.
A dialogue box will appear containing a drop-down list box with the available
systems.
2 Select one of the available systems and click on ‘OK’. When you connect to
another system, all settings have to be retrieved. This may take some time.