Oce North America TDS600 - Manual (Page 111)

Océ Power Logic: Remote Logic 111
Installation procedure for MS Windows
systems
Before you install Océ Remote Logic, you must take note of the following
minimum system requirements for the remote system. The system must be a
Pentium 233 with 32 Mb RAM running Windows 95, 98, NT (service pack 3)
or Windows 2000. Contact your local Océ organisation for more possible
systems.
Océ Remote Logic (Queue Manager, System Control Panel and Settings
Editor) are on the Océ TDS600 CD-ROM and on the Océ Power Logic
Controller CD-ROM provided with the system. The installation procedure for
Remote Logic is quite simple and self-explanatory. When you select the
‘Install remote applications’ option on the CD-ROM, a Wizard starts to guide
you through the installation process. When the installation process is complete
you do not have to restart your system.
Note: Remote Logic only works when TCP/IP is enabled on your system. Refer
to your system administrator for assistance with the installation procedure for
TCP/IP.
▼ ▼ ▼ ▼ Install Remote Logic
1 Insert the Océ remote Logic CD-ROM or the Océ Power Logic Controller
CD-ROM into the CD-ROM drive of your PC.
2 Select the ‘Install remote applications’ option.
The installation Wizard starts, and asks to select a setup language.
[71] Choosing a setup language