Oce North America TDS600 - Manual (Page 264)

264 Océ TDS600 Multifunctional Digital System User Manual
5 Clean the upper and lower knife using Cleaner K (see figure 159).
[159] Cleaning the upper and lower knife
6 Oil the felt using Fixing Unit Cleaning Oil (silicon oil).
[160] Oiling the felt
Close the side door of the reinforcement unit. The knives are automatically
placed back in their home positions. The picture on the display disappears, and
the message ‘Press start to resume job’ or ‘Ready to print’ appears, depending
on whether or not a job was interrupted to clean the knives.