Oce North America TDS600 - Manual (Page 31)

Use the Océ TDS600 to print 31
5 Use the up/down buttons to select the material you just loaded.
6 Press the on line button to put the printer on line again. The printer now knows
which material is used by the manual feeder.
▼ ▼ ▼ ▼ Set media size
1 Press the on line button on the printer operating panel to put the printer off line.
The message ‘Off line’ is displayed in the status window (see figure 5 on
page 30).
2 Press the left selection button to shift the focus to the Media option.
A shadow effect is used to indicate that the focus is set to this option.
3 Use the up/down buttons to select the roll or sheet feeder for which you have
just loaded new media.
4 Press the right selection button to activate the Size option.
The dotted line around the current selection is changed into an uninterrupted
line and the small selection triangles next to the specified size are no longer
dimmed.
5 Use the up/down buttons to select the size for the media you just loaded.
6 Press the on line button to put the printer on line again. The printer now knows
which media size is used for the specified roll or sheet feeder.
Special media indication
On the Océ TDS600 Printer, you can attach a Special indication (exclamation
mark: !) to a roll or sheet feeder which uses special media (for instance
coloured paper). This indication is used to identify the roll or sheet feeder to
the printer. For this roll or sheet feeder the automatic media change option is
disabled.
▼ ▼ ▼ ▼ Set a special media indication
1 Press the on line button on the printer operating panel to put the printer off line.
The message ‘Off line’ is displayed in the status window (see figure 5 on
page 30).
2 Press the left selection button to shift the focus to the Media option.
A shadow effect is used to indicate that the focus is set to this option.
3 Use the up/down buttons to select the roll or sheet feeder for which you have
just loaded special media.
4 Press the right selection button to activate the ‘Type’ option.
The dotted line around the current selection is changed into an uninterrupted
line and the small selection triangles next to the specified type are no longer
dimmed.