Oce North America TDS600 - Manual (Page 127)

Océ Power Logic: Queue Manager 127
Modes
The Queue Manager has the following modes:
■ Anonymous user mode
■
Repro operator mode
■
Key operator mode
■ System administrator mode
■
Service operator
These different modes are designed to limit access to the specific functions to
authorized users only.
The anonymous user mode only offers view access to the queue. In this mode
the available buttons are disabled.
The repro operator, the key operator and the system administrator modes allow
you to perform a number of activities on the jobs in the queue, with the help of
the Abort, Delete, Resume and Hold buttons. The service operator mode is
meant for Océ technicians.
Note: In the Queue Manager and the System Control Panel, the repro operator,
the key operator and the system administrator have the same user rights. In the
Settings Editor, however, the user modes offer different rights.
Access The access to the key operator, repro operator, system administrator
modes and service operator is password protected to allow only authorized
personnel to use particular functions. You can enter these modes by selecting
the Login option from the File menu and by specifying the correct password
when prompted for it (see ‘Log in’ on page 118).
From the ‘File’ menu, select ‘Close’ to exit the Queue Manager.
Job priority The priority of print and copy jobs in the Queue Manager is
determined by the order in which they are submitted to the Océ TDS600.
However, there is a setting in the Settings Editor which allows you to give copy
jobs priority over print jobs.