Oce North America TDS600 - Manual (Page 131)

Océ Power Logic: Queue Manager 131
Note: You can select a consecutive list of jobs to be put on hold by clicking
on the first job, holding down the Shift key and clicking on the last job. You
can select a non-consecutive list of jobs to be put on hold by clicking on
each desired job while holding down the Ctrl key.
2 Click on the Hold button.
An icon for a job that is put on hold (see ‘Icons’ on page 128) is displayed in
front of the job when the job is put on hold.
Note: A job that is put on hold will retain its position in the print queue.
Once it reaches the top of the queue, the job that is put on hold will stay
there until it is restarted or deleted. While a job is on hold, other jobs will
be printed, even when they were behind the job on hold in the queue. The
active job and the jobs in printing state can not be put on hold by the Queue
Manager.
▼ ▼ ▼ ▼ Restart jobs that are put on hold
1 Select the desired job(s) by clicking on it/them.
Note: You can select a consecutive list of jobs to be restarted by clicking on
the first job, holding down the Shift key and clicking on the last job. You can
select a non-consecutive list of jobs to be restarted by clicking on each
desired job while holding down the Ctrl key.
2 Click on the Resume button.
The selected job(s) will now be restarted.
▼ ▼ ▼ ▼ Move jobs to top
1 Select the desired job(s) by clicking on it/them.
2 Click on the ‘Move to top’ button on the toolbar.
If more than one job is selected then the first selected job will be on top, the
second will be on top, the second below that one and so on.
Inbox queue
All print job are sent to the ‘Inbox’ queue, if the setting ‘Jobs in inbox’ is set
in the settings Editor. if you want to print your jobs, select the jobs in the
‘Inbox’ from the queue manager, and press the ‘Print’ button (see figure 73 on
page 126).
The Key Operator determines if jobs go to the inbox, are send to the print
queue or if the jobs are printed as described in the job ticket. The setting in the
in the settings editor: ‘System - Job management - Print jobs’