Oce North America TDS600 - Manual (Page 150)

150 Océ TDS600 Multifunctional Digital System User Manual
When an Apply is performed, first the contents of the current settings is copied
to the backup file. There are two versions of this file, one for KO settings and
one for SA settings. These files are always stored on the system.
▼ ▼ ▼ ▼ Load a settings file
1 Open the ‘File’ menu and select ‘Open’.
A dialogue box is displayed from where you can choose the right file.
2 Click the ‘Apply’ button.
The loaded settings are transferred to the system.
Note: This is only possible if the user is logged in as a key operator or system
administrator.
▼ ▼ ▼ ▼ Specify the custom card
The custom card on the scanner panel contains high priority settings. Because
there is only room for five default settings on the basic card and there are more
functions that might qualify, the custom card is programmable.
This option allows you to add or delete current settings on the custom card. In
the left window all the available setting groups are displayed. In the right
window all the current settings are displayed. You can use the two arrow
buttons between the two windows to add settings to or remove settings from
the custom card.
1 Click the ‘Scanner’ button.
2 Select the ‘Custom card’ tab.
3 Press the upper arrow button to add settings to the custom card. The maximum
number of settings that can be added to the custom card is five.
4 To change the order of the settings on the card click on one of the buttons on
the right of the ‘Custom card’ window.
5 Click the ‘Apply’ button to save any changes you have made.