Oki 5400 - Manual (Page 10)

2 User’s Guide
fax machine, do not connect your fax machine into anything other
than a standard telephone socket.
• Your fax machine has an earthed, 3-pin plug as a safety feature and
it will only connect to an earthed outlet. If you cannot connect this
plug to your power outlet, then it is possible that you have an older,
non-earthed outlet. Contact an electrician to have your power outlet
replaced. Do not use an adapter to defeat the earthing.
• The electrical power outlet should be located near the fax machine
and should be easily accessible.
• The TEL ports on the back of the fax machine are only suitable for
2 wire devices. Not all standard telephones will respond to
incoming ringing when connected to an extension socket.
• This fax machine may not necessarily provide an effective hand-
over of a call from a telephone connected to the same line.
• The operation of this fax machine on the same line as a telephone or
other equipment with audible warning devices or automatic ring
detectors will rise to bell tinkle or noise and may cause false
tripping of the ring detector. Should such problems occur, the user
is not to contact the telephone company.
Operation & maintenance
• Use a dry cloth to clean the control panel and the main body of the
unit.
• Aside from the instructions specifically mentioned in this user’s
guide, your fax machine is not user serviceable. DO NOT attempt to
service the machine or lubricate moving parts by yourself.
• Disconnect the power cable before trying to remove any objects that
may have fallen into the machine.
• Immediately disconnect the fax machine if it becomes physically
damaged and arrange for its repair or disposal.
• When relocating your fax machine, always disconnect the
telephone line before disconnecting the power cable. When
reconnecting your fax machine, connect the power cable first, then
the telephone line.
• This fax machine is not intended to be used in parallel with any
other telephone devices.