Oki 5400 - Manual (Page 45)

Dial Directories 37
Engl
is
h One touch parameters
If you are experiencing problems communicating with a remote location
in a very noisy telephone area, set up a One Touch key for that location and
try turning Echo Protection on for that One Touch key.
1. Press the Select Function key.
2. Press the 9/User Program One Touch key. The display shows
1:FUNC. PROGRAMMING.
3. Press the YES key. The display shows FUNCTION NO. [ ].
4. Using the numeric keypad, enter 23. The display shows 23:ONE
TOUCH PARAM.
5. Press the One Touch key for the location whose settings you want to
change. The display shows ECHO PROTECTION, [OFF].
6. Press the NO key to switch Echo Protection on.
7. Press the YES key to confirm your selection.
8. Press the Select Function key to finish.
Note:
Should you later change the location the One Touch
key is used for, then remember to switch Echo
Protection off.
Chain dialling
Each fax number that you enter or program into your fax machine can be
up to 32 digits long. In the case that you need to dial a number which is
longer than 32 digits, then you can use the chain dial feature.
To create a chain dial number, program the first 31 digits of the number
into a One Touch key or Auto Dial number. Then press the Plus One Touch
key to make this is a chain dial number. Next, program the rest of the
number into another One Touch key or Auto Dial number. You can, if so
desired, leave teh second part of the number unprogrammed and enter it
manually on the numeric keypad.
To use a chain dial number, select the One Touch key or Auto Dial number
programmed with the first part of the chain dial number. The display will
show PRESS OT/AD/SRCH KEY. Then select the One Touch key or Auto
Dial number programmed with the second part of the chain dial number.
If the second part of the chain dial number was not programmed, enter it