Oki 5400 - Manual (Page 63)

Advanced Operations 55
Engl
is
h 8. Press the YES key and the display shows BROADCAST/
MEMORYT/X or FEEDER TX depending on the User Function 18
setting.
9. If display shows FEEDERTX go to step 10. If display shows
BROADCAST/MEMORYTX press the NO key. The display shows
FEEDERTX.
10. Select a location. Refer to the instructions below.
11. Press the Start key. Your fax machine then waits for the time and
date you have set before sending the fax.
Sending delayed fax from memory
1. Load your documents.
2. Press the Select Function key.
3. Press the 1/Delayed TX One Touch key. The display shows
DELAYED TX and today’s date.
4. If transmission is to occur today press YES key and go to step 7. If
transmission is to occur at a later date press the NO key.
5. Using the numeric keypad, enter the date on which you wish the
transmission to begin.
6. Press the YES key. The display shows PRG. START TIME.
7. Using the numeric keypad, enter the time on which you wish the
transmission to begin.
Note:
Enter the time using a 24-hour clock, i.e., 8:00 a.m.
would be entered as 08:00 and 8:00 p.m. would be
entered as 20:00.
8. Press the YES key and the display shows BROADCAST/
MEMORYT/X or FEEDER TX depending on the User Function 18
setting.
To Select Using Do This
One Touch key Press the One Touch key. Lift the main One Touch
keypad to access One Touch keys 16 to 30.
Auto Dial number Press the Auto Dial key, then enter the two digit
Auto Dial number on the numeric keypad.
A number dialled on the numeric keypad Dial as you would on a normal telephone.