Figure 51 move cartridge to screen – Quantum Sun StorEdge L100 User Manual
Page 106
Chapter 5 Running Diagnostic Programs
Running the Move Medium Test
90
Sun StorEdge™ L25 Tape Library and Sun StorEdge™ L100 Tape Library User’s Guide
7
Press the
Up
and
Down
buttons to select the source element of
the cartridge.
8
When the flashing arrow is next to the desired source element,
press
Select
.
The GUI displays the
Move Cartridge TO
screen (see
A flashing arrow indicates the currently selected destination
element.
Figure 51 Move
Cartridge TO Screen
9
Press the
Level
button to select the level where the desired
destination element is located.
10
Press the
Up
and
Down
buttons to select the destination
element for the cartridge.
11
When the flashing arrow is next to the desired destination
element, press
Select
.
The GUI displays the
Confirm Move Cartridge
screen (see