Quantum Sun StorEdge L100 - Manual (Page 90)

Chapter 3 Changing the Library Configuration
Changing the Auto-Import Option
74 Sun StorEdge™ L25 Tape Library and Sun StorEdge™ L100 Tape Library User’s Guide
Changing the Auto-Import Option
3
The Auto-Import option controls how cartridges are moved from
the import/export slots of the mailbox to the magazine slots:
• Enabling this option causes the library to move any cartridges
in the import/export slots to the first (lowest element address)
free magazine slots automatically. The move is performed
automatically (without need for host commands) at both
power-up and whenever the import/export magazine is
inserted.
• Disabling this option removes the above capability; the host
software must issue SCSI commands to move cartridges from
the import/export slots to the required magazine slots.
To change the Auto-Import setting:
1 Access the Configuration screen (see Accessing the
Configuration Screen on page 53).
2 Press the Up or Down buttons until Auto-Import is highlighted.
3 Press Select .
4 Use the Up or Down buttons to select the desired Auto-Import
setting. The available settings are Enabled or Disabled .
Note: The default setting is Disabled .