Changing a tape drive id, Figure 38 l100 drive numbering – Quantum Sun StorEdge L100 User Manual
Page 72
Advertising
Chapter 3 Changing the Library Configuration
Changing a Tape Drive ID
56
Sun StorEdge™ L25 Tape Library and Sun StorEdge™ L100 Tape Library User’s Guide
Changing a Tape Drive ID
3
By default, the L25 tape drive SCSI IDs are set as follows:
• Drive 1 ID = 1
• Drive 2 ID = 2
The L100 tape drive SCSI IDs are set as follows:
• Drive 1 ID = 1
• Drive 2 ID = 2
• Drive 3 ID = 3
• Drive 4 ID = 4
• Drive 5 ID = 15
• Drive 6 ID = 14
illustrates the drive numbering scheme for the L100.
Figure 38 L100 Drive
Numbering
Drive 1 (default
SCSI ID = 1)
Drive 2 (default
SCSI ID = 2)
Drive 3 (default
SCSI ID = 3)
Drive 4 (default
SCSI ID = 4)
Drive 5 (default
SCSI ID = 15)
Drive 6 (default
SCSI ID = 14)
Advertising
This manual is related to the following products: