Configuring the mailbox – Quantum Sun StorEdge L100 User Manual
Page 53
Chapter 2 Basic Operations
Using the Mailbox
Sun StorEdge™ L25 Tape Library and Sun StorEdge™ L100 Tape Library User’s Guide
37
Configuring the
Mailbox
2
By default, the
Import/Export
option is set to
MAP
. To change this
setting:
1
On the main screen, press
Mailbox
.
The GUI displays the
Mailbox
screen (see
).
2
On the
Mailbox
screen, press
Config
.
The GUI displays the
Configuration
screen, with the
Import/
Export
option highlighted.
3
Use the
Up
and
Down
buttons to select the desired Import/
Export setting. The available settings are
None
,
1-Slot
,
10-Slot
(or
12-Slot
in LTO libraries), and
MAP
.
4
Press
Select
.
5
Press
Main
to return to the main screen.
Note:
The default setting is
MAP
.
For more information about these settings, see
Changing the Import/Export Setting
Caution:
If you do not return to the main screen after
changing this setting, your change will not be
saved to NVRAM.
Note:
You must reboot the library before this setting will
take effect.