Running the confidence test program, Figure 56 demo programs screen – Quantum Sun StorEdge L100 User Manual
Page 114
Chapter 6 Running the Demonstration Programs
Running the Confidence Test Program
98
Sun StorEdge™ L25 Tape Library and Sun StorEdge™ L100 Tape Library User’s Guide
Figure 56 Demo
Programs Screen
Running the Confidence Test Program
6
The
Confidence Test
program moves a data cartridge to each tape
drive, each magazine, and the fixed slot. The test ends
automatically when the cartridge has been placed in all tape
drives, magazines, and fixed slots in the library.
To run the
Confidence Test
program:
1
Load a single data cartridge into the top left magazine.
2
Access the
Demo Programs
screen (see
).
3
Press the
Up
or
Down
buttons to select
Confidence Test
.
4
Press
Select
.
The
Confidence Test
program ends automatically when
complete.
Note:
Leave all the other magazine slots empty.