Quantum Sun StorEdge L100 - Manual (Page 50)

Chapter 2 Basic Operations
Using the Mailbox
34 Sun StorEdge™ L25 Tape Library and Sun StorEdge™ L100 Tape Library User’s Guide
2 Use the Move command on the Mailbox screen to move the
cartridge you wish to export to the mailbox.
3 Repeat steps 1a through 1d to open the mailbox again.
4 Remove the exported cartridge from the mailbox.
5 Reinsert the data cartridge you removed in step 1e (if any) into
the mailbox.
6 Reinsert the magazine into the library.
7 Close the magazine access door.
8 On the Mailbox - OPEN screen, press Re-Lock .
The library locks the magazine access door and inventories the
mailbox.
Importing Cartridges in 10-Slot or 12-Slot Mode 2
To import cartridges in 10-slot or 12-slot mode:
1 On the main screen, press Mailbox .
The GUI displays the Mailbox screen (see figure 22 ).
2 Press Open .
The GUI displays the Mailbox - OPEN screen (see figure 23 ).
3 Press the white button next to the top left magazine access door
and open the door.
4 Pull the magazine out of the library.
5 Insert the cartridges you wish to import into the magazine.
6 Reinsert the magazine into the library.
7 Close the magazine access door.
8 On the Mailbox - OPEN screen, press Re-Lock .
The library locks the magazine access door and the cartridges
are moved under control of the host software to the desired
locations.