Cleaning a tape drive, Figure 41 select cleaning cartridge screen – Quantum Sun StorEdge L100 User Manual
Page 95
Chapter 4 Performing Maintenance Operations
Cleaning a Tape Drive
Sun StorEdge™ L25 Tape Library and Sun StorEdge™ L100 Tape Library User’s Guide
79
Cleaning a Tape Drive
4
To clean a tape drive:
1
Access the
Maintenance
2
Press
Clean
.
The GUI displays the
Select Cleaning Cartridge
screen (see
). A flashing arrow indicates the currently selected
source element.
Figure 41 Select
Cleaning Cartridge
Screen
3
If the library is an L25 in a multiple library stack or an L100,
press the
Level
button to select the level where the cleaning
cartridge is located.
4
Press the
Up
and
Down
buttons to select the source element that
contains the cleaning cartridge.
5
When the flashing arrow is next to the source element that
contains the cleaning cartridge, press
Select
.
The GUI displays the
Select Tape Drive
screen (see
). A
flashing arrow indicates the currently selected drive.