Quadra-Fire CASTILE-CCR - Manual (Page 4)

Page 4 250-6422D October 11, 2005
R Castile Pellet Stove RR 1
Listing and Code Approvals
A. Appliance Certification
C. Glass Specifications
E. BTU & Efficiency Specifications
This appliance is equipped with 5mm ceramic glass. Replace
glass only with 5mm ceramic glass. Please contact your
dealer for replacement glass.
This appliance is approved for mobile home installations
when not installed in a sleeping room and when an outside
combustion air inlet is provided. The structural integrity of
the mobile home floor, ceiling, and walls must be maintained.
The appliance must be properly grounded to the frame of
the mobile home and use only listed pellet vent Class “L” or
“PL” connector pipe. A Quadra-Fire Outside Air Kit must be
installed in a mobile home installation.
B. Mobile Home Approved
NOTE: This installation must conform with local codes.
In the absence of local codes you must comply with the
ASTM E1509, (UM) 84-HUD, ULC/ORD-C-1482
D. Electrical Rating
115 VAC, 60 Hz, Start 4.1 Amps, Run 1.1 Amps
*BTU output will vary, depending on the brand of fuel you
use in your stove. Consult your Quadra-Fire dealer for
best results.
NOTE: Hearth & Home Technologies, manufacturer of
this appliance, reserves the right to alter its products,
their specifications and/or price without notice.
Particulate Emis-
sions Rating:
.7 grams/hr
*BTU Output: 8,000 - 30,000 / hr
Heating Capacity: up to 1,500 sq. ft.
Hopper Capacity: 40 lbs
Fuel: Wood Pellets or Shelled Corn
Shipping Weight: 258 lbs
Model: Castile Pellet Stove
Laboratory: OMNI Test Laboratories, Inc.
Report No. 061-S-33-2
Type: Solid Fuel Room Heater/Pellet Type
Standard: ASTM E1509 and ULC/ORD-C1482
Room Heater Pellet Fuel Burning
type and (UM) 84-HUD, Mobile Home
Approved.
State Listing: State of Colorado