Quantum 10K II - Manual (Page 18)

Contents
xviii Quantum Atlas 10K II Ultra 160/m SCSI Hard Disk Drives
Tables (continued)
B-1 SCSI Bus Timing Values – ANSI SCSI-2 Standard............................................................................B-1
B-2 SCSI-3 Bus Control Timing................................................................................................................B-4
B-3 Single Transition (ST) SCSI Bus Data and Information Phase Timing..........................................B-5
B-4 Double Transition (DT) SCSI Bus Data and Information Phase Timing .......................................B-6
B-5 Signal Sources....................................................................................................................................B-9
B-6 SCSI ID Bits & Arbitration Priorities ................................................................................................B-10
B-7 SCSI-3 Bus Signal Definitions .........................................................................................................B-11
B-8 Information Transfer Phases...........................................................................................................B-18
B-9 Drive MESSAGE OUT Phase Response...........................................................................................B-23
B-10 SCSI Message Format......................................................................................................................B-26
B-11 Supported SCSI Messages...............................................................................................................B-27
B-12 Extended Message – Field Descriptions........................................................................................B-28
B-13 Drive’s Response to DISCONNECT Message .................................................................................B-30
B-14 IDENTIFY Message – Field Descriptions ........................................................................................B-31
B-15 Drive’s Response to INITIATOR DETECTED ERROR.......................................................................B-32
B-16 SYNCHRONOUS DATA TRANSFER REQUEST Message – Field Descriptions .............................B-37
B-17 WIDE DATA TRANSFER REQUEST Message – Field Descriptions................................................B-39
B-18 PARALLEL PROTOCOL REQUEST Message – Field Descriptions.................................................B-41
C-1 Transfer Period Factor Field Values When PARL = 1 ....................................................................C-1
C-2 Transfer Period Factor Field Values When PARL = 0 ....................................................................C-2
C-3 Settings for the QAS, DT, and IU Fields of the Negotiated Rate Information Page (INQUIRY
Command) .........................................................................................................................................C-2