Quantum 10K II - Manual (Page 32)

Installation
Quantum Atlas 10K II Ultra 160/m SCSI Hard Disk Drives 3 − 5
3.3 UNPACKING INSTRUCTIONS
CAUTION
The maximum limits for physical shock can be exceeded if the disk drive is
not handled properly. Special care must be taken not to bump or drop the
disk drive.
1. Open the shipping container and remove the packing assembly that contains the
disk drive.
2. Remove the disk drive from the packing assembly.
CAUTION
During shipment and handling, the antistatic electrostatic discharge (ESD)
bag prevents damage to electronic components due to electrostatic
discharge. To avoid accidental damage to the disk drive, do not use a sharp
instrument to open the ESD bag. Save the packing materials for possible
future use.
3. When you are ready to install the disk drive, remove it from the ESD bag
Figure 3.3 shows the packing assembly for a single Quantum Atlas 10K II Ultra
160/m SCSI hard disk drive. A 12-pack shipping container is available for
multiple drive shipments.
Figure 3-3 Drive Packing Assembly