Toshiba 6F3B0253 - Manual (Page 216)

6F3B0253
214
T1-16S User’s Manual
7. Instructions
FUN 146 STOT Step sequence output
Expression
Input
−
[ STOT A ]
−
Function
When the input is ON, the device A is set to ON and the devices of STIN instructions on the same
rung are reset to OFF.
Execution condition
Input Operation Output
OFF No execution -
ON Execution -
Operand
Name Device Register Constant Index
X Y R S T. C. XW YW RW SW T C D I J K
A Step device
√
Example
See example on STIN (FUN 145) instruction.
Note
•
The STIZ, STIN and STOT instructions are used together to configure the step sequence.
•
Two or more STOT instructions can be placed on one rung to perform simultaneous sequences.
•
Two or more STIN instructions can be placed on one rung in parallel or in series to perform loop
or convergence of sequences. (Max. 11 STIN instructions on one rung)
•
To perform the conditional branch (sequence selection), separate the rungs as follows.
This limitation is applied to T1 version 1.00 only.
[ STIN A ] | | [ STOT B ] [ STIN A ] | | [ STOT B ]
| | [ STOT C ] [ STIN A ] | | [ STOT C ]
Not allowed Available