Telephone system configuration – Toshiba Stratagy IVP8 User Manual
Page 34
Installation
Step 11: Configure Stratagy IVP8
22
Stratagy IVP8 Installation Guide 01/02
Change Toshiba Plug and Play Option
1. From the Tools menu, press 5.
2. From the Toshiba Plug and Play screen, enter
the number of the selection.
The Stratagy IVP8 utility automatically
defines the telephone system dial codes and
tone patterns, system integration patterns and
default mailboxes for the specific telephone
system.
3. When the process is complete, press any key to
reboot. The DOS prompt displays.
4. To continue, re-enter Stratagy Admin.The Main Menu displays with the new telephone system
designation.
5. Press Alt+t to access the Tools submenu.
Telephone System Configuration
This function modifies the following codes/integration patterns:
•
Telephone System Dial Codes – Stratagy IVP8 performs certain actions on your telephone
system by using defined telephone system dial codes. To define the dial codes, you must
modify the telephone system dial code parameters.
•
System Integration Patterns – Enables modification to the telephone system integration
patterns.
Note
The telephone system configuration is set using the pbx_type parameter (see
for details).
If your system is to be configured for system dial codes or system integration patterns, you should
edit them now. As an example:
“Stratagy System Configuration”
.
If your Toshiba telephone system is configured for tone first, you would:
1.
Press
1
to Edit System Dial Codes.
2.
From the Telephone System Dial Codes screen, delete the suffix –
1
from the line
What to dial
AFTER dialing the User ID extension
.
3.
Press
Esc
.
4.
Press
2
to save your changes without restarting Stratagy IVP8.
604
6