Toshiba Stratagy IVP8 - Manual (Page 35)

Installation
Step 11: Configure Stratagy IVP8
Stratagy IVP8 Installation Guide 01/02
23
Modify Codes and Integration Patterns
1. From the Tools menu, press 4. The Telephone System Configuration screen displays.
2. From the Telephone System
Configuration screen, press 1.
The Telephone System Dial
Codes screen displays (shown
right).
...or 2. The System
Integration Patterns screen
displays (shown right).
3. After making the change(s), press ESC. The Telephone System Config screen displays.
4. From the Telephone System Config screen, press 1. The changes are transmitted to
Stratagy IVP8 and Stratagy IVP8 is shut down and restarted. By shutting down and restarting
Stratagy IVP8, the changes take effect.
...or 2.The changes are transmitted to Stratagy IVP8 but Stratagy IVP8 is not shut down or
restarted. Until you restart Stratagy IVP8, the changes do not take effect.
...or 3. The changes you made are cancelled and not saved.
5. If you pressed 1 to save the changes, press any key to reboot. The DOS prompt displays. To
continue, you must re-enter Stratagy Admin.
4079
4668