Toshiba Stratagy IVP8 - Manual (Page 49)

Maintenance
Tools
Stratagy IVP8 Installation Guide 01/02
37
Retrieve Trace File
This function copies the trace data log file (TRACE.OUT) to the Stratagy Admin PC’s hard drive.
As part of this function, a Trace Filter Setup screen (see
Figure 5 on page 38 ) enables you to
specify the filtering rules for selecting the desired trace records.
After Stratagy Admin filters the trace data, it decodes and expands the data into readable records
containing the information requested by you in the Trace Filter Setup screen.
Note The size of the trace file can be set using the trace_cap parameter in the install.cfg file of
Stratagy IVP8 (see
“trace_cap” on page 26 for a description of the parameter).
1. From the Tools menu, press
7 .
2. The trace file name defaults
to TRACE.OUT. From the
Retrieve Trace File screen,
press Enter.
3. Enter the directory where
you want to copy the file.
The default is: C:\ADMIN3.
If you need a different
directory, type over the default. Press Enter. Be sure to enter the complete path. If the
directory already exists, you are given the option of entering a new directory or overwriting the
file. The Trace Filter Setup screen displays (see
Figure 5 on page 38 ).
4. Select the items you want included in the TRACE.OUT file. Refer to the field descriptions on
page 38 .
5. When you are finished, press Alt+e.
Once the data has been
expanded, Stratagy IVP8
copies the file to the
directory/file specified in
Step 3 of this procedure. A
dialog status box displays
(shown at right).
When the copy is complete,
another status box displays
(shown at right):
You can use any text editor
to review the file.
3237
3253
3254