Toshiba Stratagy IVP8 - Manual (Page 39)

Installation
Step 12: Program the Mailboxes
Stratagy IVP8 Installation Guide 01/02
27
Busy Station Identification
To use this feature you must configure the console_slot_id and dss_active parameters, program the
DSS Port
field (see Step 12: “Program the Mailboxes” on page 27 ), and install/program a PDKU
as the DSS console (see “Busy Station Identification” on page 7 ).
➤
To configure the feature in Stratagy
1. Set the dss_active parameter to TRUE.
2. Configure the DSS Port field on the User Menu – Options screen for each mailbox.
Important! Once the DSS/Busy Lamp feature has been programmed using the two parameters
and the DSS Port field, Stratagy IVP8 must be restarted two times. The first restart
configures the DSS parameters/field. The second restart “loads” the DSS
parameters/field into active memory.
Stratagy IVP8 System Time
Using the ksu_time parameter, you can synchronize Stratagy IVP8’s system clock with the system
clock of the supporting Strata CTX/Strata DK telephone system. Setting this parameter to true,
disables the daylight_saving_time parameter.
Note An LCD telephone must always be physically installed on the first port of the PDKU card in
the Strata DK (defined in console_slot_id parameter). During installation, the
Stratagy IVP8’s system time must be reset prior to syching with the Strata CTX/Strata DK.
See
“ksu_time” on page 26 for details.
This feature requires SMDI integration to work with the Strata CTX.
Step 12: Program the Mailboxes
➤ Program the User mailboxes for the customer’s application. See “Software” on page 3 for
Stratagy IVP8 special features on the Main Menu and Users Menu, Options screen. See
Chapter 6 – Users Menu , Chapter 7 – Auto (Scheduling) Menu and Chapter 8 – Notify Menu in
the Stratagy R3 I&M Manual for complete details on using the screens.
Step 13: Program the Applications
Note See Chapter 9 – Token Programming in the Stratagy R3 I&M Manual for complete details
on all the Stratagy tokens.
Exclusive Stratagy IVP8/Stratagy DK Tokens
Tokens available exclusively for the Stratagy IVP8/Stratagy DK are:
• KM – Enables a Stratagy Admin PC’s modem to communicate with the Stratagy IVP8 internal
modem (2400 baud). This token is factory programmed in User ID 993.
Example: @KM
• KT ( ) – Directs calls to a designated User ID when DSS function is active (dss_active = true),
the DSS port is assigned in the “answering” mailbox, and the Night Transfer on the DSS
console is On.
Syntax: KT(XXX)G(YYY)
where:
XXX Box number used when Night Transfer is On.
YYY Box number used when Night Transfer is Off.